Hefei Youzhipin Engineering Machinery Co.,,Ltd.

Products

Contact Us

Contact Form Demo (#3)

Product Name:Fuel Nozzle with Digital Flow Meter (Digital Fuel Gun)

Applicable Scenarios:Gas stations, construction machinery refueling, diesel/gasoline transport vehicles, small oil depots, and other fuel refueling scenarios

产品规格

  • 原厂零件编号:YA00031829(核心原厂零件编号)
  • 可互换零件编号:4705920、9315463、YA60027216、4454518、4426355(与原厂零件100%可互换)
  • 产品类型:挖掘机驾驶室集成控制开关面板
  • 结构特征
    • 高强度灰色工程塑料外壳一体成型,抗冲击、耐老化
    • 多组耐磨旋钮/按钮,集成了空调、油门、照明、雨刮器、点火、收音机等全部功能。
    • 完整的原厂规格线束+防水电连接器,兼容原车电路,即插即用
    • 标准安装支架,完美适配日立挖掘机的驾驶室仪表板安装位置。
  • 适用机型:日立 ZX200-5G、ZX240-5G、ZX330-5G、ZX360-5G、ZX490-5G 及其他 -5A/-5G 系列挖掘机
  • 安装方式:螺栓固定安装,标准线束连接器,即插即用。

产品规格

  • 原厂零件编号:11173166,VOE11173166(与原厂零件100%互换)
  • 产品类型:装载机用液压控制电磁阀
  • 结构特征
    • 型号:DG4V3-42A-D24(通用互换型号),额定电压24V 直流
    • 额定压力:P&A/B 35MPa,T 10MPa,兼容装载机高压液压系统
    • 高强度铝合金阀体+不锈钢安装板,耐高压、耐磨损
    • 标准防水电连接器,兼容车载24V电路
    • 配备原厂规格安装螺丝,可直接安装。
  • 适用机型:沃尔沃装载机 L90E、L70E、L60E、L110E、L110、L120、L150、L180、L220、L330、L60 及其他全系列轮式装载机
  • 工作原理:电磁线圈通电产生磁力,推动阀芯运动,从而控制液压油路;断电后阀芯复位,实现对油路开关的精确控制。
  • 安装方式:螺栓固定安装,标准液压/电气接口,即装即用

Product Name:JCB 70180321 Speed Sensor (Crankshaft/Flywheel Speed Sensor)

OEM Part Number:70180321

产品名称:三菱电机燃油泵(零件编号:15100-85501 / 15100-79100,交叉参考编号:91118458 / ADK86806)

适用设备:配备三菱发动机的乘用车、轻型商用车、工程机械和发电机组

Product Name:DOGA Park System Control Unit / Relay Module (Part No.: 100-1365-55-00, Compatible: 100-1365-17-00)

Applicable Equipment:Fits parking assist systems (PARK SYSTEM) of commercial vehicles, construction machinery, or special vehicles

Product Name:Oil Pressure Switch Sensor (Part No.: 55571684 / 130827)

Applicable Equipment

  • Compatibility: Passenger cars, light commercial vehicles, and some construction machinery equipped with corresponding engines
  • System: Engine lubrication system (oil pressure monitoring)

Product Name:Main Battery Switch for PC200-8 Excavator (Part Numbers: 08068-00001 / 7861-93-920B)

Applicable Equipment:Komatsu PC200-8, PC240-8, PC400-8 series excavators and other construction machinery

产品规格

  • 原厂零件编号:2848A013(与原厂零件100%互换)
  • 产品类型:柴油发动机用机油压力传感器/发送器
  • 结构特征
    • 标准螺纹安装螺柱+六角锁紧螺母,安装简便,密封性能优异
    • 镀锌金属压力隔膜外壳,耐腐蚀、耐高压
    • 单端子电气连接器,兼容原车线束
    • 内置高精度压力传感元件,响应灵敏
  • 适用机型:Perkins 1004-4、1004-40、1004-40T、1006-60T系列柴油发动机,广泛兼容配备这些发动机的工程机械,例如装载机、挖掘机、发电机组等。
  • 工作原理:油压推动隔膜变形,驱动触点/电位器动作,输出相应的电信号,实现压力监测和报警。
  • 安装方法:直接将油管拧入发动机油管的相应安装孔,将端子连接到原车线束,即可安装。
Product Name:Caterpillar Piston Position Sensor (Part No.: 266-1476 / 2661476)

Applicable Equipment

  • Machinery: Caterpillar D6N, D8T, D9T bulldozers/tractors
  • Engines: Caterpillar C15, C18, C6.6 diesel engines

产品规格

  • OEM零件编号:22M-43-21170(与原厂零件100%互换)
  • 产品类型:挖掘机液压安全锁微动开关
  • 结构特征
    • 高强度工程塑料外壳一体成型,抗冲击、耐老化
    • 内置高精度行程微动开关,触发灵敏,机械寿命长
    • 原厂规格线束+防水电连接器(紫色信号线),兼容原车电路
    • 采用双孔安装支架,完美适配挖掘机驾驶室安全杆的安装位置。
  • 适用机型:小松PC14、PC16、PC18、PC20、PC22、PC26、PC27R、PC30、PC35、PC40、PC55、PC60、PC56-7、PC57-7等全系列小型挖掘机
  • 工作原理:安全杆的运动带动开关柱塞伸缩,实现电路的通断,控制液压先导系统的功率,从而实现液压系统的锁定和解锁。
  • 安装方式:螺栓固定安装,标准电连接器,即插即用。

Product Specifications

  • OEM Part Number: 339-8822, 339882 (100% interchangeable with genuine parts)
  • Product Type: Temperature Sensor for Construction Machinery & Diesel Engines
  • Structure Features:
    • Stainless steel threaded valve body + high-precision thermistor probe, corrosion-resistant, high-pressure resistant, high and low temperature resistant, suitable for harsh working conditions
    • Standard threaded interface, excellent sealing performance, leak-proof
    • High-temperature resistant braided harness + waterproof electrical connector, dust-proof, waterproof, vibration-resistant, compatible with Caterpillar on-board circuits
    • Original factory-level harness length, no additional wiring required, plug-and-play
  • Applicable Models: All series of Caterpillar excavators, loaders, bulldozers, generator sets and other construction machinery and diesel engines (such as 320D, 323D, 336D series models)
  • Working Principle: The resistance of the thermistor changes linearly with temperature, and the ECU calculates the real-time temperature through the resistance change
  • Installation: Directly screw into the corresponding mounting hole of the engine/hydraulic system, standard connector for plug-and-play use

Contact Us

Contact Form Demo (#3)